7.2 Testing Linphone
Check your Linphone configuration using sipomatic,
a small test program that can answer calls made from Linphone.
Testing a Linphone Setup
-
Open a terminal.
-
Enter sipomatic at
the command line prompt.
-
Start Linphone.
-
Enter sip:[email protected]:5064 as and click .
-
If Linphone
is configured correctly, you will hear a phone ringing and, after
a short while, you will hear a short announcement.
If you successfully completed this procedure, you can be sure
that your audio setup and the network setup are working. If this
test fails, check whether your sound device is correctly configured
and whether the playback level is set to a reasonable value. If
you still fail to hear anything, check the network setup including
the port numbers for SIP and RTP. If any other application or protocol
uses the defaults ports for these as proposed by Linphone, consider
changing ports and retry.
