If a DHCP server does not already exist on the network, configure
one. Refer to Chapter 24 Dynamic Host Configuration Protocol (DHCP) for details. Make sure the
configuration file contains the following so that PXE booting is enabled for
systems which support it:
allow booting;
allow bootp;
class "pxeclients" {
match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
next-server <server-ip>;
filename "linux-install/pxelinux.0";
} |
where <next-server> option should be
replaced with the IP address of the tftp server.
