This section details commonly used configuration directives. For a complete list, see the slapd.conf(5) manual page. This section separates the configuration file directives into global, backend-specific and data-specific categories, describing each directive and its default value (if any), and giving an example of its use.
Directives described in this section apply to all backends and databases unless specifically overridden in a backend or database definition. Arguments that should be replaced by actual text are shown in brackets <>.
This directive grants access (specified by <accesslevel>) to a set of entries and/or attributes (specified by <what>) by one or more requestors (specified by <who>). See the The access Configuration Directive section of this chapter for a summary of basic usage.
Note: If no
access directives are specified, the default access control policy,
access to * by * read, allows all both authenticated and anonymous users read access.
6.2.1.2. attributetype <RFC4512 Attribute Type Description>
This directive defines an attribute type. Please see the Schema Specification chapter for information regarding how to use this directive.
Specify the number of seconds to wait before forcibly closing an idle client connection. An idletimeout of 0, the default, disables this feature.
This directive specifies that slapd should read additional configuration information from the given file before continuing with the next line of the current file. The included file should follow the normal slapd config file format. The file is commonly used to include files containing schema specifications.
Note: You should be careful when using this directive - there is no small limit on the number of nested include directives, and no loop detection is done.
This directive specifies the level at which debugging statements and operation statistics should be syslogged (currently logged to the syslogd(8) LOG_LOCAL4 facility). You must have configured OpenLDAP --enable-debug (the default) for this to work (except for the two statistics levels, which are always enabled). Log levels are additive. To display what numbers correspond to what kind of debugging, invoke slapd with -? or consult the table below. The possible values for <integer> are:
Table 6.1: Debugging Levels
|
Level
|
Description
|
|
-1
|
enable all debugging
|
|
0
|
no debugging
|
|
1
|
trace function calls
|
|
2
|
debug packet handling
|
|
4
|
heavy trace debugging
|
|
8
|
connection management
|
|
16
|
print out packets sent and received
|
|
32
|
search filter processing
|
|
64
|
configuration file processing
|
|
128
|
access control list processing
|
|
256
|
stats log connections/operations/results
|
|
512
|
stats log entries sent
|
|
1024
|
print communication with shell backends
|
|
2048
|
print entry parsing debugging
|
Example:
loglevel -1
This will cause lots and lots of debugging information to be logged.
Default:
loglevel 256
6.2.1.6. objectclass <RFC4512 Object Class Description>
This directive defines an object class. Please see the Schema Specification chapter for information regarding how to use this directive.
This directive specifies the referral to pass back when slapd cannot find a local database to handle a request.
Example:
referral ldap://root.openldap.org
This will refer non-local queries to the global root LDAP server at the OpenLDAP Project. Smart LDAP clients can re-ask their query at that server, but note that most of these clients are only going to know how to handle simple LDAP URLs that contain a host part and optionally a distinguished name part.
This directive specifies the maximum number of entries to return from a search operation.
Default:
sizelimit 500
This directive specifies the maximum number of seconds (in real time) slapd will spend answering a search request. If a request is not finished in this time, a result indicating an exceeded timelimit will be returned.
Default:
timelimit 3600
Directives in this section apply only to the backend in which they are defined. They are supported by every type of backend. Backend directives apply to all databases instances of the same type and, depending on the directive, may be overridden by database directives.
This directive marks the beginning of a backend declaration. <type> should be one of the supported backend types listed in Table 6.2.
Table 5.2: Database Backends
|
Types
|
Description
|
|
bdb
|
Berkeley DB transactional backend
|
|
dnssrv
|
DNS SRV backend
|
|
hdb
|
Hierarchical variant of bdb backend
|
|
ldap
|
Lightweight Directory Access Protocol (Proxy) backend
|
|
meta
|
Meta Directory backend
|
|
monitor
|
Monitor backend
|
|
passwd
|
Provides read-only access to passwd(5)
|
|
perl
|
Perl Programmable backend
|
|
shell
|
Shell (extern program) backend
|
|
sql
|
SQL Programmable backend
|
Example:
backend bdb
This marks the beginning of a new BDB backend definition.
Directives in this section apply only to the database in which they are defined. They are supported by every type of database.
This directive marks the beginning of a database instance declaration. <type> should be one of the supported backend types listed in Table 6.2.
Example:
database bdb
This marks the beginning of a new BDB database instance declaration.
This directive puts the database into "read-only" mode. Any attempts to modify the database will return an "unwilling to perform" error.
Default:
readonly off
This directive specifies the DN that is not subject to access control or administrative limit restrictions for operations on this database. The DN need not refer to an entry in this database or even in the directory. The DN may refer to a SASL identity.
Entry-based Example:
rootdn "cn=Manager,dc=example,dc=com"
SASL-based Example:
rootdn "uid=root,cn=example.com,cn=digest-md5,cn=auth"
See the SASL Authentication section for information on SASL authentication identities.
This directive can be used to specifies a password for the DN for the rootdn (when the rootdn is set to a DN within the database).
Example:
rootpw secret
It is also permissible to provide hash of the password in RFC2307 form. slappasswd(8) may be used to generate the password hash.
Example:
rootpw {SSHA}ZKKuqbEKJfKSXhUbHG3fG8MDn9j1v4QN
The hash was generated using the command slappasswd -s secret.
This directive specifies the DN suffix of queries that will be passed to this backend database. Multiple suffix lines can be given, and at least one is required for each database definition.
Example:
suffix "dc=example,dc=com"
Queries with a DN ending in "dc=example,dc=com" will be passed to this backend.
Note: When the backend to pass a query to is selected, slapd looks at the suffix line(s) in each database definition in the order they appear in the file. Thus, if one database suffix is a prefix of another, it must appear after it in the config file.
syncrepl rid=<replica ID>
provider=ldap[s]://<hostname>[:port]
[type=refreshOnly|refreshAndPersist]
[interval=dd:hh:mm:ss]
[retry=[<retry interval> <# of retries>]+]
searchbase=<base DN>
[filter=<filter str>]
[scope=sub|one|base]
[attrs=<attr list>]
[attrsonly]
[sizelimit=<limit>]
[timelimit=<limit>]
[schemachecking=on|off]
[bindmethod=simple|sasl]
[binddn=<DN>]
[saslmech=<mech>]
[authcid=<identity>]
[authzid=<identity>]
[credentials=<passwd>]
[realm=<realm>]
[secprops=<properties>]
This directive specifies the current database as a replica of the master content by establishing the current slapd(8) as a replication consumer site running a syncrepl replication engine. The master database is located at the replication provider site specified by the provider parameter. The replica database is kept up-to-date with the master content using the LDAP Content Synchronization protocol. See RFC4533 for more information on the protocol.
The rid parameter is used for identification of the current syncrepl directive within the replication consumer server, where <replica ID> uniquely identifies the syncrepl specification described by the current syncrepl directive. <replica ID> is non-negative and is no more than three decimal digits in length.
The provider parameter specifies the replication provider site containing the master content as an LDAP URI. The provider parameter specifies a scheme, a host and optionally a port where the provider slapd instance can be found. Either a domain name or IP address may be used for <hostname>. Examples are ldap://provider.example.com:389 or ldaps://192.168.1.1:636. If <port> is not given, the standard LDAP port number (389 or 636) is used. Note that the syncrepl uses a consumer-initiated protocol, and hence its specification is located at the consumer site, whereas the replica specification is located at the provider site. syncrepl and replica directives define two independent replication mechanisms. They do not represent the replication peers of each other.
The content of the syncrepl replica is defined using a search specification as its result set. The consumer slapd will send search requests to the provider slapd according to the search specification. The search specification includes searchbase, scope, filter, attrs, attrsonly, sizelimit, and timelimit parameters as in the normal search specification. The searchbase parameter has no default value and must always be specified. The scope defaults to sub, the filter defaults to (objectclass=*), attrs defaults to "*,+" to replicate all user and operational attributes, and attrsonly is unset by default. Both sizelimit and timelimit default to "unlimited", and only integers or "unlimited" may be specified.
The LDAP Content Synchronization protocol has two operation types: refreshOnly and refreshAndPersist. The operation type is specified by the type parameter. In the refreshOnly operation, the next synchronization search operation is periodically rescheduled at an interval time after each synchronization operation finishes. The interval is specified by the interval parameter. It is set to one day by default. In the refreshAndPersist operation, a synchronization search remains persistent in the provider slapd. Further updates to the master replica will generate searchResultEntry to the consumer slapd as the search responses to the persistent synchronization search.
If an error occurs during replication, the consumer will attempt to reconnect according to the retry parameter which is a list of the <retry interval> and <# of retries> pairs. For example, retry="60 10 300 3" lets the consumer retry every 60 seconds for the first 10 times and then retry every 300 seconds for the next three times before stop retrying. + in <# of retries> means indefinite number of retries until success.
The schema checking can be enforced at the LDAP Sync consumer site by turning on the schemachecking parameter. If it is turned on, every replicated entry will be checked for its schema as the entry is stored into the replica content. Every entry in the replica should contain those attributes required by the schema definition. If it is turned off, entries will be stored without checking schema conformance. The default is off.
The binddn parameter gives the DN to bind as for the syncrepl searches to the provider slapd. It should be a DN which has read access to the replication content in the master database.
The bindmethod is simple or sasl, depending on whether simple password-based authentication or SASL authentication is to be used when connecting to the provider slapd.
Simple authentication should not be used unless adequate data integrity and confidentiality protections are in place (e.g. TLS or IPsec). Simple authentication requires specification of binddn and credentials parameters.
SASL authentication is generally recommended. SASL authentication requires specification of a mechanism using the saslmech parameter. Depending on the mechanism, an authentication identity and/or credentials can be specified using authcid and credentials, respectively. The authzid parameter may be used to specify an authorization identity.
The realm parameter specifies a realm which a certain mechanisms authenticate the identity within. The secprops parameter specifies Cyrus SASL security properties.
The syncrepl replication mechanism is supported by the two primary database backends: back-bdb and back-hdb.
See the LDAP Sync Replication chapter of the admin guide for more information on how to use this directive.
This directive is only applicable in a slave (or shadow) slapd(8) instance. It specifies the URL to return to clients which submit update requests upon the replica. If specified multiple times, each URL is provided.
Example:
updateref ldap://master.example.net
Directives in this category only apply to both the BDB and the HDB database. That is, they must follow a "database bdb" or "database hdb" line and come before any subsequent "backend" or "database" line. For a complete reference of BDB/HDB configuration directives, see slapd-bdb(5).
This directive specifies the directory where the BDB files containing the database and associated indices live.
Default:
directory /usr/local/var/openldap-data
