Connect a Sony DRX-500ULX, DVD+/-RW+/-R to Debin GNU/Linux using USB.
Plugging it in results in a coule of beeps as usbmgr
recognises it. You can also run usbview or
lsusb to check that it is properly recognised. The device
will be treated as a SCSI CD so you should be able to mount it as:
# mount -t iso9660 /dev/scd1 /mnt
|
Create a specific mount point for it, such as /media/dvdrw:
Add an appropriate line to your /etc/fstab:
/dev/scd1 /media/dvdrw auto defaults,user,noauto 0 0
|
With cdrdao and cdrecord the CD write functionality works just fine:
# cdrdao disk-info --device 4,0,0 --driver generic-mmc
|
For a DVD first create an image to burn on to the DVD.
# mkisofs -R -o cdimage.raw dvd/
|
Now install dvdrecord
to write to a DVD-RW with:
# dvdrecord -v speed=2 dev=4,0,0 cdimage.raw
|
Note that dvdrecord
does not appear to be actively
maintained. Also, this dvdrecord command will fail for a
DVD+RW (it only works for DVD-RW presently), so use the
dvd+rw-tools
instead. This package is actively maintained
and also supports DVD-R(W). Format the DVD+RW with:
# dvd+rw-format /dev/scd1
|
Now growisofs is meant to work but failed with this particular drive
with a message indicating that the drive does not support TAO (Track
At Once) mode.
# growisofs /dev/scd1 -R -J dvd/
|
So instead use the pre-mastered CD image to burn the DVD+RW:
# growisofs -Z /dev/scd1=cdimage.raw
|
So, to recap, to burn a DVD+RW:
# mkisofs -R -o cdimage.raw dvd/
# dvd+rw-format /dev/scd1
# growisofs -Z /dev/scd1=cdimage.raw
|
Check out the -dvd-compat option as well
Copyright © 1995-2006 [email protected]
|