If a DHCP server does not already exist on the network,
configure one. Refer to Chapter 24
Dynamic Host Configuration Protocol (DHCP) for details.
Make sure the configuration file contains the following so that PXE
booting is enabled for systems which support it:
allow booting;
allow bootp;
class "pxeclients" {
match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
next-server <server-ip>;
filename "linux-install/pxelinux.0";
}
|
where <next-server> option
should be replaced with the IP address of the tftp server.
